OKi Metcal AC-DFP Chamber Liner and Filter for MFR-HDS Hand-piece.

MicroCare FRZ Anti-Static Circuit Chiller is used to find intermittent faults in circuit boards or as a heat sink for sensitive components during hand soldering. Includes a conductive additive to minimize static build-up and ice formation. Non-flammable, safe on plastics, More... and chills to lower than -45 ºC in seconds. Does not leave residues or generate component-shattering thermal shock. 10 oz Aerosol. Less

SCS 980 Ionized Air Gun is used to neutralize electrostatic charges by removing particle contamination and electrostatic attraction. It is compact and lightweight and maintains a constant balanced ionization for control of surface charges. It meets ANSI/ESD S20.20 standards More... and is NIST calibrated. 120 V. Less

ACL Staticide ESD Static Dissipative Wastebasket 5075 is used for rooms that require static controls. It is made of a high-density polyethylene that does not contain silicone, dyes, carbon, or plasticizers. 21 3/4 in height x 13 in diameter. 11 gal Can.

Henkel Loctite® Zinc Anti-Seize is a smooth, homogenous mixture of zinc dust and petrolatum that prevents seizing during assembly or disassembly of threaded or unthreaded metal joints. It also provides corrosion protection for both aluminum and ferrous metals while More... acting as a lubricant. 1 lb Can. Less

Fisnar® CV629 is a pneumatically operated valve designed for precision dispensing of many types of fluids, such as solvents, oils, silicones, glues, UV adhesives, inks, etc. The system can be integrated with an automatic dispensing robot or used as a bench-dispensing More... valve. Shot sizes may be fine tuned for applications where micro deposits are required. Less

Caulk3M Strip Caulk 08578 is a soft, non-hardening butyl rubber material. Sixty 1 ft Strips/Box.

Surebonder Pro Series 101 Check Valve is a required component when using 103N, 103R, and 103F Pro Series glue gun nozzles. 0.16 in Orifice.

ACL Staticide ESD Static Dissipative Wastebasket Liner 5076 Pink is used for rooms that require static control. 24 in x 34 in Liner.

Fisnar® VMS400 is a pneumatic, mini spool valve designed for dispensing low viscosity to high viscosity materials. When air pressure is applied to the air inlet of the VMS400 valve, the spool will be forced forward and fluid will be dispensed. The VMS400 valve More... has a suck-back effect that eliminates lumping at the end of the needle after dispensing. Turning the adjustment control at the top of the valve regulates the amount of suck-back. Shot size and flow rate are controlled by the tip size, fluid pressure and the duration that the valve is open. Less

SCS 1/3PLDES700 Desiccant is a drying agent secured in a strong, sulphur-free, non-woven plastic Tyvek® pouch. It provides protection for moisture-sensitive electronics within a moisture barrier bag. Contains no hazardous substances, can be baked and re-used, and More... is best used with a humidity indicator card. Includes one pail of 700 2.125 in x 2.5 in 1/3 unit pouches. Less

Dymax® 37863 Zip Shutter is designed to protect operator from UV exposure while using Dymax® UV Flood Lamps. It allows manually and timed operating modes, minimizes stray light, controls exposure time, and reduces work surface temperature.

EIT DIN Rail UV Intensity Monitor uses an electronic signal conditioning module and Compact Sensor to monitor one UV lamp. It is an online, electro-optic tool that offers controlled measurements, conditioned output signals, DIN rail mounting, and programmable alarms. More... Less

medmix MIXPAC™ COX™, formerly Sulzer, EA0150 Replacement Regulator for EA300P Pneumatic Applicator.

Techspray® Envirotech Freezer is a 100% HFC-134a, non-flammable, quick evaporating liquid that is used to aid inspection of faulty components and increase visibility of oxidized junctions, cracks in circuit boards, and solder joints. It is non-ozone depleting, More... leaves zero residue, safe on plastics, and moisture free. 10 oz Can. Less

Designetics 14F Funnel for all Designetics brand bottles. 2.25 in.

Fisnar® 560949 Brass Slide Air Valve is designed to help control the flow of air within a dispensing system.

Fisnar® 5601062 Hose Clamp is used to clamp a hose while dispensing liquid. 0.25 in.

Fisnar® 562146 Quick Connect Hose can be used with the Fisnar CR300 Metal Cartridge Retainer system. 6 ft Long.

SCS 51060HIC125 Humidity Card is made in the USA, and is designed to measure the level of relative humidity that the contents of the packing have been exposed to. The Humidity Indicator Cards (HICs) come printed with moisture sensitive spots that react to different More... levels of humidity with an observable color change from blue to pink. Less

ITW FoxJet SoloSeries 200 Porous Media Extended Decap Ink is programmed to be compatible with the SoloSeries Smart Level Ink Detection System for level monitoring. Black, 42 mL Cartridge, 5 Pack.

Fisnar® 560779 Regulator Knob Black is designed to help control the flow of air within a dispensing hose.

SCS 129LABEL MIL-STD-129 Label shows message and warning symbol in strict accordance with the Military standard. 500 labels/roll.

medmix MIXPAC™, formerly Sulzer, EASP-DPF-003 hand held actuator for the DPF 1500-01. Excludes air control tubes. Actuator can be used on 1:1, 2:1, 3:1, and 4:1 ratio dispensing guns. 940-1500 mL.

ITW FoxJet Linx CJ400 Stacker Trolley is an accessory for the CJ400 Continuous InkJet Printer to assist in mounting and transporting the system.

ACL Staticide 800 Digital Megohmmeter is an easy to operate, compact lightweight, portable meter designed to measure temperature, humidity and electrical resistance/resistivity.

Laird Technologies Eccosorb® CFS-8480 is a two component, magnetically loaded, castable silicone rubber designed to be used in the UHF region and lower microwave frequency range. It has high temperature resistance, can be poured or painted, and helps reduce surface More... currents or lower the Q of cavities. It has a variety of applications and is often used to improve insulation resistance, stop voltage flashover, and protect sensitive components. Flexible, electrically non-conductive, and has a high loss tangent. 4 kg Kit. Less

medmix MIXPAC™ COX™, formerly Sulzer, EAM300XL Multi-Ratio Manual Gun is used for high viscosity materials and features a catch plate, support discs, and replaceable parts. The applicator is designed with a cast aluminum handle and an epoxy-coated steel More... frame support. Includes a mechanical advantage ratio of 25:1 with cartridge capacities of 375 mL, 450 mL, and 600 mL. Less

OKi Metcal AC-DFP Chamber Liner and Filter for MFR-HDS Hand-piece.

Techcon Systems TS1258 Pressure Pot. 100 psi pressure pot is designed to accommodate all solvent and epoxy fluids, as well as CA's and UV's. Techcon components are recommended for use with other Techcon Parts only.

ITW FoxJet 6000-903 LP Tamp Pad Label Present Sensor is a diffuse light sensor that is capable of detecting a wide range of textures, colors and materials. Compatible with a variety of label applicator systems.

Dymax® 36190 Reflector 5000 is used to increase light source efficiency. Designed to be used with Dymax® 38002 and 38003 models.

Fisnar® 562027 Plastic Cartridge Retainer Plastic Spacer is used with the Fisnar® 580091H-A Plastic Cartridge Retainer system to dispense directly from standard caulking cartridges, with the ability to dispense pressure up to 65 psi. Provides a timed shot More... without post extrusion. 1/10 gal. Less

Ellsworth Accessories Mix Stick is made of treated hardwood and is disposable for single-use mixing applications. 3/4 in x 6 in.

TAH EA160-HUB Locking Hub Adapter for Luer Lock needles or extensions.

SCS 497AJM Electronic Service Vacuum is a self-contained unit created for high-efficiency cleaning. This vacuum comes equipped with ESD safe attachments and a one horsepower, six amp motor. Detachable power cord allows for easy storage, quick setup and portable. 120 More... V. Less

Enercon EnerDyne™ Water-Based Dyne Pens are designed to indicate surface treatment levels on polymer based substrates and establish that the material is correctly treated prior to applying inks, coatings, paints or adhesives. Variety Set includes 30, 32, 35, 38, More... 41, 44, 48, and 56 dyne levels. The EnerDyne™ Pens are water-based and nontoxic. 8 pens per pack. Less

Techcon Systems TS1201 Manual Dispensing Pen utilizes a disposable molded pinch tube assembly, designed to handle a wide variety of fluids - from adhesives and lubricants to sealants and masks. Gravity or pressure fed, the pen has a built-in shot and flow rate control More... for optimum repeatability. Less

Techcon Systems TS5420 Adjustable Stroke Needle Valve is designed to dispense very precise deposits over a wide range of shot sizes, down to 0.003 cc. This valve is a pneumatically triggered single-acting valve that can be used with an internal spring close (single More... acting) or may be connected for air closing without the spring. Techcon components are recommended for use with other Techcon Parts only. Less

Techspray Envirotech Freezer is a 100% HFC-134a, non-flammable, quick evaporating liquid that is used to aid inspection of faulty components and increase visibility of oxidized junctions, cracks in circuit boards, and solder joints. It is non-ozone depleting, leaves More... zero residue, safe on plastics, and moisture free. 10 oz Can. Less

Henkel Loctite® 97201 Footswitch is a 9-pin D shell connector with a 7-foot cable.

OKi Metcal MFR-HDCA Coil Assembly for MFR-HDS and MFR-H5-D5 desoldering hand-pieces.

Ellsworth Accessories Gylptal 1201 Enamel Red is a general purpose paint that can be applied with brushing or spraying methods. 1 qt Can.

MicroCare FRZ General Purpose Circuit Chiller is used to find intermittent faults in circuit boards or as a heat sink for sensitive components during hand soldering. Non-flammable, ozone-safe, ultra-pure, safe on plastics, and chills to lower than -45 ºC in seconds. More... Does not leave residues or generate component-shattering thermal shock. 10 oz Aerosol. Less

Fisnar® DCK800X Dispensing Component Kit is a convenient benchtop consumable storage and reference kit. A careful selection of the most common dispensing components are included: blunt-end tips, tapered tips, angled tips, flexible tips, PTFE lined tips, brush tips, More... tip caps, and fittings. Less

Miller-Stephenson MS-122ADL Release Agent Dry Lubricant White is environmental-friendly, nonflammable, and non-staining. As a release agent it can be used on a variety of materials such as plastics, urethanes, acrylics, rubbers, and elastomers. Dry lubricant applications More... include metals, wood, and ceramics. 12 oz Aerosol. Less

Dow® DOWSIL™ TC-5515 LT Low Density Thermally Conductive Gap Filler is a two component, silicone material that is used to dissipate heat from electronic devices, EV modules, and other heat-generating components. It is non-flowable and cures at room temperature More... or heat accelerated. 720 g Kit. Less

Henkel Loctite® Frekote 700-NC offers excellent release properties for the most demanding applications and is a great all-purpose release agent. Mold Release. 1 pt Can.

Fisnar® ESD-WSK-US Workstation Kit is a comprehensive ESD workstation kit containing all the required equipment to create a static-controlled workspace environment, allowing users to prevent unnecessary damage to delicate electronic components or devices, while More... carrying out dispensing applications. The kit contains: ESD mat (24 in x 48 in) with 10 mm male stud in each corner, ESD protected area vinyl sign, earth bonding plug with 3 x 10 mm male studs, 3/8 in hypoallergenic & adjustable fabric wrist strap, coiled earth lead with 10 mm female stud, and straight earth lead with 10 mm female stud. Less

Fisnar® F1300N.2 Rotary Dispensing Table provides an efficient method of dispensing a circular pattern on areas that are difficult to access. The tilting Z-axis allows controlled rotary dispensing on a fixed angle. Used for dispensing adhesives, silicones, grease, More... and lubricants, the F1300N.2 is fully adjustable in rotation speed, circle diameter, and dispensing time. Dispense from barrels, cartridges, or valves mounted on the Z-axis. Less

Fisnar 5801383-KIT Nylon Cartridge Retainer Assembly includes a nylon-molded retainer along with a durable nylon molded screw-cap assembly. It is economical, lightweight, and designed for pneumatically pressurizing standard caulking cartridges, to achieve controlled More... fluid dispense results. It has the ability to withstand up to 100 psi (6.9 bar) pressures, 300 mL capacity. Also includes a 6 ft connector hose. Less

Techcon Systems TS9800 Jet Valve TT1.5 is designed for highly precise, ultra-fast results using a highspeed piezo actuator within the TS900 dispensing system. It features a dispensing speed as fast as 1,500 Hz with 2,000 Hz bursts, and micro shots as small as 0.5 nL. More... The valve includes fully adjustable parameter settings and a modular design to be compatible with robotic systems. Includes a heater, nozzle not included. Less

3M 583 Thermal Film Brown is a flexible, high strength, thermoplastic bonding product. It is designed for solvent or heat activated bonding, and can be crosslinked using post heat exposure. 3 in x 60 yd Roll.

DuPont MOLYKOTE® Q2-3233 Putty White is a high bounce, high elasticity silicone compound with a unique combination of rheological properties. It offers excellent resistance to slump or flow when at rest, easy movement under low mechanical force, and moisture resistance. More... 50 lb Box. Less

Henkel Loctite® Bonderite® L-FM Pretreat Aero Lubricant Orange is a liquid compound designed to inhibit the formation of tenacious scale associated with heat treating stainless steels, metals, and nickel chrome alloys in non-inter gas atmosphere furnaces. More... It may also be used as a lubricant for hot flaring of titanium tubing, hot forming of sheet titanium, and cold forming of 17-7 PH steel plates. It is constructed to significantly reduce intergranular oxidation, metal loss, surface notching, and descaling time. 5 gal Pail. Less

Henkel Loctite® Bonderite® S-FN 330 Acheson Dry Film Lubricant is a resin-bonded lubricant coating designed to provide dry film lubrication in a variety of consumer, and industrial applications. It is formulated to be applied as a spray, and produces a low More... friction coating free of stick-slip characteristics. 1 gal Can. Less

Dow® SILASTIC™ RTV-4136-M Base Beige is a two component, room temperature curing, high durometer, medium tear resistance silicone. It features good dimensional stability, very low shrinkage, and high inhibition resistance. 204.1 kg Drum.

DuPont MOLYKOTE® D 321 R Anti-friction Coating Gray-Black is an air-curing, solid, dry lubricant that is used for metal to metal applications that have high loads and slow to medium fast movements. It can also be used to improve the running-in process, permanently More... lubricating stressed sliding guides, or on high voltage switches. It provides resistance against ageing and stick-slips. 400 mL Aerosol Can. Less

Dymax® 35120 Igniter is a replacement component for Dymax® Flood Lamps and power sources.

Fisnar® 560027D Foot Pedal Assembly for use with SL101N and VC1195N controllers.

Techcon Systems 918-000-012 is a rod clamp assembly that is used with the Production Master Stand. Techcon components are recommended for use with other Techcon Parts only.

OKi Metcal NZKT-1 Rework Nozzle Kit is used with the HCT900-11 Convection Tool for Chip Resistors, SOIC, and TSOP packages.

Techcon 3300-0607 Spool Valve Compression Spring is a replacement spring for TS934/TS941 Spool Valves. Techcon components are recommended for use with other Techcon Parts only.

Fisnar® 580046 Vacuum Pickup Pen is a lightweight, ergonomic, ESD-safe pickup pen designed for used with the Fisnar® VPP50 Vacuum Pickup System.

Fisnar® VC300 Pneumatic Valve Controller has the ability to control the operation of pneumatic dispensing valves with a spring return closing action or air actuated closing action. The internal high speed 5/2 way pneumatic solenoid valve is able to rapidly actuate More... and shut off the dispense valve to prevent drooling, and achieve consistent and repeatable dispense results. Less

Techcon Systems EA14TE-1 TE Needle, Olive. Stainless-steel cannula with a double helix polypropylene hub. 14 ga x 1 in. Techcon components are recommended for use with other Techcon Parts only.

Dow SILASTIC™ RTV-4234-T4 Base for use with SILASTIC™ RTV curing agent products. Mold making rubber for prototype design, production tooling and rapid prototyping. Base only. 20 kg Pail.