PTFE Coatings Suppliers

Licensed Industrial Applicator (LIA) of Teflon® coatings Types of coatings include PTFE, PTFE-S, PTFE PFA, PTFE TFE, ETFE & PTFE FEP, Krytox®, Vydax®, Silverstone®, Xylan®, Dykor®, Castall®, Halar®, Emralon®, Kynar®, Electrofilm®, Everlube®, dry film lubricant & dielectric coatings. Finishes include non-stick, non-wetting, heat resistant, chemical resistant & cryogenically stable to temperatures as low as -450 degrees F. Capable of accommodating parts up to 20 ft. in sample, prototype, short run & long run productions. Coatings can be applied to automotive parts, electronic devices, hardware, appliance parts, bearings, valves, pumps, gaskets, hand tools & industrial equipment & machinery. FDA compliant coatings are also available for food processing & consumer applications. Sand blasting and grit blasting services also available.

www.donwell.com/coating-applications.htm

Manufacturer of protective Teflon® coatings for aluminum, carbon steel, stainless steel, copper, titanium, brass, magnesium glass, fiberglass, rubber and plastics. Licensed Industrial Applicator for Teflon® coatings. Features include non-stick, non-wetting, recoatable, electrical properties and chemical resistance. Serves the food service, packaging, medical and aerospace industries.

www.plastechcoatings.com/chemours-teflon/

Manufacturer of polymer coatings. Types include composite, nanostructured and low friction coatings. Serves the aerospace, agriculture, automotive, construction, energy, fluid power, oil and gas, primary metal, railway and recreational industries. Meets AS9100D standards. REACH and RoHS compliant.

www.ggbearings.com/en/company/ggb-tribologi...

Custom manufacturer and distributor of industrial coatings including PTFE (polytetrafluoroethylene)coatings with 500 degrees F temperature. Various features include two-coat systems, low friction, non-stick, water based and abrasion and chemical resistance. Coatings are suitable for used on carbon steel, aluminum, stainless steel, steel alloys, brass, magnesium, glass, fiberglass, rubber and plastics. FDA compliant.

www.suncoating.com/custom-industrial-fluoro...

Applicators of non-stick/release coatings including PTFE coatings for parts including rollers, guide plates/rails, seal bars and molds. Coating can be done on substrates such as aluminum, zinc, tin, titanium, bronze, brass, copper, grey steels, castings and super alloys. Industries served include agriculture, grain processing, cement, power plants, steel mills, mining, locomotive, pulverizing, wire drawing and fabrication. 24 hour services available.

metallicbonds.com/coating-types/non-stick-r...

Custom coating services including PTFE coatings, Xylan™, Halar™, PFA, FEP, and other non-stick systems; Everlube™, Dykor™, Rilsan™, ALSEAL™, Mussel Buster Propeller Protection™, and more. AS9100/ISO 9001 Registered Company. Chemical resistant, non-stick, dry-film lubrication, low friction, corrosion resistant, MIL Spec coatings, food processing, FDA Conforming, packaging equipment, industrial bakeware, high purity water systems, oil & gas, fire proof/resistant coatings.

matrixcoat.com/

Manufacturer of metals and ceramics thermal spray coatings. Made from chromium oxide, aluminum oxide, titanium oxide, tungsten carbide, stainless steel, and chrome carbide. HVOF, plasma, electric arc, and flame spray coating processes are available. Suitable for hoppers, rotary cutters, guillotine blades, paddles and mixing bowls, non-stick (release), and dry lube. Serves the diesel engines, packaging machinery, emission control, electronics, wind energy, food processing, printing, and pump industries. FDA approved.

www.precisioncoatings.com/dura-slide/

Manufacturer of dry film lubricants including thin film coatings. Specifications include -460 degrees F to plus 1,200 degrees F operating temperature, -350 degrees F to plus 2,400 degrees F vacuum environment temperature, load capacity up to 100,000 psi, 30 Rockwell C approximate hardness, 7.4 g/cu. cm density & 0.5 microns thickness. Dry film lubricants are inert, inorganic, non-toxic, non-distortive, non-magnetic, non-corrosive & fuel & solvent resistant & also feature modified tungsten disulfide composition in lamellar form & mechanical-molecular interlock. Suitable for pins, pinions, ratchet gears, bearings, piston blocks, springs, curing & feed rolls, instruments, cutting tool, drills, end mills, jig burrs & reamers. Meets Military Spec. DOD-L-85645

ws2coating.com/other-lubes-and-coatings/

Liquid and powder PTFE coating services. Coating applications and properties include protection, decoration, corrosion resistance, chemical resistance, abrasion resistance, wear resistance, water resistance, heat resistance, low friction, non-stick, dielectric strength, conductivity, EMI/RFI shielding and cryogenics, amongst others. Capabilities include consultation and high volume production runs.

vanwestrum.com/

AS 9001, ISO 14001:2004 NADCAP certified. Dry film lubricant applicators. Molybedum disulfide (Moly) PTFE, Xylan ®, Sandstrom, Whitford, E/M products, MIL Spec. paints and primers. Coatings for corrosion and wear resistance, lubricity and release for aerospace, automotive, military and industrial applications.

PTFE coating services. Coating services using PTFE, PTFE, FEP, PFA, ETFE, PTFE-S one coat & PTFE-S are available. Media blast & multi step pre-treatment systems available, including zinc phosphate. Coating systems for aerospace, military, automotive, commercial, medical, chemical, nuclear, bakeware, petrochemical, computer, electronic & food processing.

www.crestcoating.com

ISO 13485, ISO 10993-1, AS9100:2009 and Nadcap certified. Custom manufacturer of plastic and PTFE coatings. Various capabilities include metal finishing, anodizing, plating, electropolishing, passivating, grinding, polishing, assembly, welding, blasting, vapor-degreasing and heat treating. Aerospace, nuclear, automotive, food and beverage, medical, solar, sanitary, pulp and paper, agriculture, textile, electronics, construction and other markets served. Meets ANSI/ASQC Z1.4 standards. ITAR and ATF registered. RoHS compliant. ELV and NSF approved.

PTFE coated fiberglass fabric and tape supplies release and heat resistance for a wide range of applications. Used extensively in packaging, sealing, laminating and solar panel production. Nominal thickness: .003 in. to .028 in. Temp range: minus 100 degrees F to plus 550 degrees F. Color: natural brown/tan. Can be custom die-cut or fabricated into belts. Widths from 1/2 in. to 36 in. Wider widths also available.

catalog.cshyde.com/category/ptfe-teflon-pro...

ISO 9001 certified manufacturer and woman owned & service company with capabilities for spraying, finishing, treating & servicing PTFE type coatings. Other coatings include corrosion resistant, Plasma, ceramic/PTFE, type, metallic, carbide, tungsten carbide, traction & high release.

www.racineflame.com/coatings.html

Manufacturer of low molecular weight PTFE lubricants, which are dispersed in solvents. Lubricants can be used for mold release applications, light loads and wear surfaces. Suitable for use in operating temperatures up to 425 degrees F. Suitable for the automotive, marine, aircraft, missiles, farm equipment, fasteners and other applications. REACH compliant.

www.tiodize.com/

ISO 9001:2008 certified manufacturer and worldwide distributor of silicone and PTFE coatings. Coatings are ultra- thin and pinhole free. Parylene N, Parylene C, Parylene D and Parylene HT are also available. Coatings are applied through vapor deposition process. Coatings provide uniform barriers to protect against corrosive liquids, fluids, gases and chemicals. Features include UV stability, optical clarity, thermal stability, dielectric properties and high lubricity. Markets served include electronics, automotive, maritime, military, aerospace and medical industries.

scscoatings.com/

Custom manufacturer of polyvinylidene fluoride (PVDF), PTFE and fluoropolymer coatings in liquid and powder forms. Coatings are available with chemical, wear and abrasion resistance, lubricity, electrical conductivity, thermo insulation and release feature. Application techniques include conventional and electrostatic spray, fluidized bed, dip and spin.

Pressure sensitive tapes & adhesive products for every application; commodity & specialty tapes & custom die-cut/converting capabilities. Tape products include: packaging, paper, vinyl, polyethylene, double coated, cloth, foil, film, protective, strapping, foam & PTFE tapes. Converting services include: sheeting, die cut, rewind/slitting & laminating.

www.can-dotape.com/product-category/product...

ISO 9001:2015, metal finishing & plating services for single, prototype & production quantities. Capabilities include high phosphorous electroless nickel plating, mid phosphorous electroless nickel plating, low phos electroless nickel plating, electroless nickel with silicon carbide, electroless nickel with PTFE plating, nickel sulfamate plating, gold plating, silver plating, bright nickel & copper plating, passivating & chromate conversion coating. Substrates include aluminum, brass, copper alloys, leaded & non-leaded steel, stainless steel & tool steel. Abrasive blasting, glass beading, testing, baking, stripping, degreasing & heat treating are available. Meets Mil-C-45662, Mil-I-45208 & Mil-Q-9858 Spec.

Custom acrylic, alkyd, epoxy, Kynar® and PTFE coating services. Steel, copper, bronze, brass, aluminum and glass substrate materials are handled. Features include abrasion, corrosion and UV resistance. Coatings can be applied by air dry, dip and spin, baked, spray and stenciling processes. Applications include cabinets, door components and window frames. Solvent degreasing, spray washing, chromate conversion, iron phosphate and zinc phosphate coating, alkaline immersion and masking pre-treatment services are offered. Capabilities include high and low volume production, labeling, packaging, part marking and titration, adhesion, coating weight and gloss testing. Markets served include aviation, medical, appliance, architectural, military, aircraft and automotive. JIT delivery, rush services and 5-7 days lead times are available.

www.americanjapanning.com/industrial-coatin...

ISO 9001:2000 certified surface treatment service for anti-wear & anti-corrosion applications. Treatments include boriding, nitrocarburizing, plasma nitriding, chrome carbide & vanadium carbide, vacuum heat treating, vacuum carburizing & laser welding. PVD coatings include titanium aluminum nitride, chromium nitride, titanium carbonitride, titanium nitride, zirconium nitride, molybdenum disulfide & ion plasma nitride coatings.

www.ibccoatings.com/

Custom manufacturer of ceramic PTFE release coatings for cracker cutters, cookie molders & molding abrasive dough. Coatings are available in 16 in. dia. x 72 in. L roll sizes. Features include water-based & abrasion, stain, steam & heat resistance. Coatings can be applied to various materials including cast iron, bronze, aluminum & steel.

www.fandsengraving.com/index.php?pn=2&sel=R...

Polytetrafluorethylene (PTFE) thick film coating services for steel, stainless steel, ceramic, plastic, copper and aluminum substrates. Available in various thicknesses, up to 1.5 micro m roughness and capable of withstanding -40 to 290 degrees C temperature. Anti-friction, plasma, powder, selective, vacuum, zinc flake and nanocoating services are also offered. Features include non-stick, resistant to adhesive, abrasion, diffusion, friction, corrosion, chemical and high temperature. Suitable for frying pan, container, pipeline, valve, sensitive probe, bathroom radiator, wash basket, electrode spoon, agitator and other applications. Serves the aerospace, automotive, chemical, engineering, food, medical, nonwoven material, packaging, printing, plastic, oil and gas industries. FDA approved.

www.aalberts-st.com/en/surface-treatment/pr...